T+A
The Solitaire T was developed with a single goal in mind: to blur the distinctions between audiophile, working and travel headphones by making the values and convictions which are the hallmark of every T+A product accessible in almost every situation in life.
The Solitaire P-SE is based on the Solitaire P, which in itself was a new and ground-breaking development, incorporating a highly refined application of the magnetostatic principle. Conceived with a single aim in mind: music reproduction in perfection.
Pushes the magneto-static principle to the point of perfection. T+A have designed these open headphones with no hint of compromise and without regard to cost, for they had only one goal in mind: musical reproduction to the very highest standard of perfection.
In 2020 a new generation of the Caruso appeared, and this constituted the greatest advance yet in the history of these devices: the new version represented a completely new development - both externally and in technical terms. The Caruso R continues this theme.
The new Caruso undoubtedly represents the greatest step forward in the development history of this equipment: in terms of external appearance and technology it has been re-designed from the ground up, whilst remaining faithful to its roots.
The CALA CDR has a high-quality CD drive, powerful output stages and a high-performance power supply. More than 100 watts of continuous power are available per channel and also allow the operation of large speakers. Various ambient colour modes.
The PA 1100 E was developed for customers who are looking for an amplifier with various digital inputs, but who no longer need a CD drive. It was designed as a stand-alone unit. The PA 1100 E is equipped with the high-quality D/A converter.
Every aspect of its design symbolises T+A's uncompromising commitment to science and music. The ability to reproduce DSD 1024 files and its complete galvanic separation are just two highlights which underline the potential of the DAC 200 in impressive style.
The analogue section of the HA 200 is based on the unique T+A HV technology. Its high-performance output stages operate in Class-A mode with a high idle current, and are effortlessly capable of driving even the most difficult of headphones.
Combines maximum power with audiophile sound characteristics. On the one hand this means 250 W of continuous power per channel, and on the other hand this substantial power does not result in a reduction in terms of subtle detail, resolution and fine dynamics.
The M 200 mono power amplifier has been developed with the sole aim of providing the ultimate in audiophile quality and performance - without any compromise or limitation. To this end the M 200 combines fine detail, resolution and detail dynamics.
The MP 200 was developed with the design requirement of combining compact dimensions with a wide range of sources. From Bluetooth and CD to the very latest streaming and radio reproduction, the unit is able to exploit all sources to their fullest potential.
The PA 2000 R can deliver a continuous power of more than 200 watts per channel into 4 ohm loudspeakers, enabling it to drive impedance-critical speakers whilst maintaining effortless control. Optional audiophile phono pre-amplifier module for MM or MC.
The amplifier is effortlessly capable of controlling speakers which are extremely critical in terms of phase and impedance. The PA 2500 is even more powerful than the smaller PA 2000 R machine, but retains exactly the same dynamism and cultured sound.
In the R 2500 R, the design and performance of T+A's R series come together with the universal usability of a 'One Box System.' Its sources enable an almost limitless selection of playback options. Integrated DSD and PCM converters. Third generation streaming architecture.
The MP 2000 R MKII is a genuine multi-talent. At first glance the casual observer may think it is just a classic CD player, but its true capabilities extend far beyond this. At its heart lies one of the world’s latest and most sophisticated digital – analogue converters (DAC).
The MP 2500 R is T+A's newest and most sophisticated Multi Source Player and PCM / DSD DAC in the R-Series. The MP 2500 R is equipped with the SACD drive from the high-end SACD player MP 3100 HV which is a completely new development.
Contrary to all the predictions, the vinyl disc has managed to sustain and even consolidate its right to exist over a period of several decades. Back in the 1990’s, when the medium was almost completely swamped by the CD, there were many who lamented its lost qualities.
The PA 3100 HV is a further development of the PA 3000 HV, and most of its sub-assemblies are identical. The immediately obvious difference is the pair of VU meters in the front panel, which display the power generated per channel in logarithmic form in Watts into 4 Ohms.
The design and concept of the P 3100 HV is based on the P 3000 HV. Outwardly, the difference is only the type number. In terms of circuitry, however, the entire preamplifier section, and thus the most important part, has been further improved.
The PSD 3100 HV was developed with the requirement to combine the performance of T+A's finest pre-amplifiers and converters with the convenience of a multi-source player. An array of professional digital inputs, FM, FM-HD, DAB+ radio, Bluetooth and streaming.
In the SDV 3100 HV T+A have now created a digital / analogue converter which is even more complex and sophisticated than their previous converters, allowing double the previous resolution levels: 32-bit / 768 kHz for PCM and DSD 1024 for bitstream data.
The SD 3100 HV is a purist converter / streamer which in an HV system acts as ultra-high quality player and converter for every imaginable digital source. It can be connected to the P 3100 HV pre-amplifier or the PA 3100 HV integrated amplifier via one of its analogue outputs.
The A 3000 HV is the ideal power amplifier and complement to the P 3000 HV pre-amplifier. It is designed as a stereo power amplifier, but can also be configured to work in mono, in which guise it is capable of delivering twice the current and doubles the pure Class-A mode.
The M 40 HV provides T+A's HV-series High-Res players and pre-amplifiers with an extremely unique, uncompromising power amplifier which satisfies the most extreme audiophile demands under a vast range of operating conditions. Valve input stages.
The PDT 3100 HV is a purist CD / SACD mechanism which does not feature supplementary integral digital sources or converters. It has been developed uniquely and exclusively for the uncompromising task of reading SACD and CD. The mechanical system is extremely refined.
T+A's latest and most sophisticated multi-media player. The basic design philosophy stems from the MP 3000 HV, but the MP 3100 HV is now capable of carrying out the full signal processing of DSD bitstream data in addition to processing PCM data to impeccable standards.
The R 300 is a very compact two-way bookshelf monitor with excellent sound characteristics. The entire cabinet is made of aluminium, hand-brushed, and anodised in high-gloss black or silver. Capable of precise, low, natural bass from a compact cabinet.
The S 300 is a compact floor-standing speaker of great beauty. Heavy cabinets made of solid aluminium, high-end speaker drivers and cross-over units, and an open sound image, devoid of distortion, with a wide dynamic range and superb bass response.
The LS 300 speaker stand has been designed specifically for the Talis R 300. The bottom panel is screwed securely to the stand, ensuring that the combination is stable when erected. The loudspeaker cables can be routed very neatly down through the profiled tube.
The entry into our world of High-End reference loudspeakers is the Solitaire S 430, which effortlessly solves the contradiction between appearance, construction and maximum audiophile performance. It becomes the next step in a new class.
The Solitaire S 530 incorporates an unprecedented array of unique top-level technologies. In-house Mag850 magnetostat. 64 high-performance magnets. 7 elliptically shaped StarStabilizer mid-range units handle the frequency range from 150 to 2000 Hz.
The Solitaire S 540 incorporates an unprecedented array of unique top-level technologies. In-house Mag850 magnetostat. 64 high-performance magnets. 7 elliptically shaped StarStabilizer mid-range units handle the frequency range from 150 to 2000 Hz.
The T+A record stabilising pressure weight has a mass of 700 g and is also machined from solid brass. It ensures that the disc lies absolutely flat on the platter, held down by consistent pressure.
A turntable brush made of solid machined brass is available as a special accessory. The brush itself is carefully balanced and consists of genuine horse-hair, gently removing dust particles from the disc.
