SPU Royal N
The SPU Royal N cartridge, with its half-inch adaptor, provides the ability to mount the unit on standard headshells, as well as in a wider range of tonearms.
The SPU Royal N provides the same sound reproduction properties as the SPU Royal GM series.
A Purely Exquisite Listening Experience.
Features
The SPU Royal N features Electrum coils, consisting of a gold and silver alloy, providing uncoloured and precise transmission of armature movements, while the slightly modified damping system makes it possible to reduce VTF and achieves a higher level of linearity.
The addition of Ortofon’s unique Replicant 100 stylus and reduced tip mass ensures open and detailed sound reproduction for a purely exquisite listening experience.
The high purity 6-nines copper wiring ensures impeccable signal transmission and preservation of the finest of microdynamic detail.
| Specifications | |
| Output Voltage at 1 kHz, 5 cm/sec. | 0.2 mV |
| Channel Balance at 1 kHz | 1 dB |
| Channel Separation at 1 kHz | 25 dB |
| Channel Separation at 15 kHz | 20 dB |
| Frequency Response | 20 Hz - 20 kHz +1.5/-0 dB |
| Tracking Ability at 315 Hz at Recommended Tracking Force | 60 µm |
| Compliance, Dynamic, Lateral | 8 µm/mN |
| Stylus Type | Nude Ortofon Replicant 100 |
| Stylus Tip Radius | r/R 5/100 µm |
| Tracking Force Range | 2.5-3.5 g (25-35 mN) |
| Tracking Force Recommended | 3.0 g (30 mN) |
| Tracking Angle | 20° |
| Internal Impedance, DC Resistance | 7 Ohm |
| Recommended Load Impedance | 100 Ohm |
| Coil Wire Material | Gold Plated Silver |
| Cartridge Weight | 13 g |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
