Cadenza Black
Cadenza Black is optimised for amazing tonal neutrality, dynamics and purity of sound.
The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium.
It also uses the WRD/Wide Range Damping-system applied for MC Windfeld, MC A90, MC Anna, Xpression and MC A95 cartridges, controlling the high and low frequency damping separately.
The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire.
Cadenza Black is high performing on areas like detail, consistency and sound staging.
| Cadenza Black Technical Data | |
| Output Voltage at 1 kHz, 5 cm/sec. | 0.33 mV |
| Channel Balance at 1 kHz | <0.8 dB |
| Channel Separation at 1 kHz | >27 dB |
| Channel Separation at 15 kHz | >20 dB |
| Frequency Response | 20 Hz - 20 kHz +/-1.5 dB |
| Tracking Ability at 315 Hz at Recommended Tracking Force | 90 µm |
| Compliance, Dynamic, Lateral | 16 µm/mN |
| Stylus Type | Nude Shibata on Boron Cantilever |
| Stylus Tip Radius | r/R 6/50 µm |
| Tracking Force Range | 2.0-2.5 g (20-25 mN) |
| Tracking Force Recommended | 2.3 g (23 mN) |
| Tracking Angle | 20° |
| Internal Impedance, DC Resistance | 5 Ohm |
| Recommended Load Impedance | >10 Ohm |
| Cartridge Body Material | Stainless Steel / Aluminium |
| Coil Wire Material | Ortofon Aucurum Wire (Gold Plated 6NX Copper Wire) |
| Cartridge Colour | Black/Black |
| Cartridge Weight | 10.7 g |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
