IA60-12
From our line of distribution amplifiers, meticulously designed to satisfy the customer and the installer, the IA60-12 powers up to 12 channels (six stereo pairs) and is configurable to 1, 2, 3, 4, 5, 6, or 12 channels. Employing Hypex amplifier technology housed in a 2U case, we front-mount the power switch and the trigger input (– 3 – 30 V AC or DC) provides signal for additional amplifiers or other equipment.
This model offers Bus Inputs and A/B Loop Outputs – the Loop outputs are non-buffered, meaning that the maximum number of amplifiers that can be looped together will depend on the output capability of your source component. Smoothly delivering 60 watts per channel at 4 ohms, the IA60-12 lets you trust in Monitor Audio to successfully your project.
| Specifications | |
| 'Connect' IP Control | N/A |
| Channel Number | 12 (6 Stereo Pairs) |
| Power (W / Channel) | 4 Ohms | 60 W |
| Power (W / Channel) | 8 Ohms | 45 W |
| Power (W / Channel) | Bridge (8 Ohms) | 100 W (4 ch) |
| Power (W / Channel) | 70 V | N/A |
| Input Impedance | 20 K Ohms |
| Output Impedance (Loop RCA) | 600 Ohms |
| Input Sensitivity | 100 mV / 1 W, 700 mV – Full Power |
| Maximum Input Voltage | 2.9 V |
| Signal to Noise (SN:R) | -100 dB (20 Hz – 20 kHz) |
| Frequency Response | 5 Hz – 50 kHz |
| Total Harmonic Distortion THD+N @ 1 kHz | 0.03% |
| Rack Height | 2U |
| Dimensions (Excluding Feet (H x W x D)) | 86.8 x 438 x 427 mm (3 7/16" x 17 1/4" x 16 13/16") |
| Dimensions (Including Feet (H x W x D)) | 97.2 x 438 x 427 mm (3 13/16" x 17 1/4" x 16 13/16") |
| Width (Including Rack Brackets) | 482 mm (19") |
| IP Communication | N/A |
| Mains Operating Voltage | 100 – 120 V @ 60 Hz / 220 – 240 V @ 50 Hz |
| Fuse Rating | 10 A (T10AL ~ 250 VAC) |
| Standby Power Consumption | <0.5 W (Green Mode) |
| Networked Standby Power Consumption | N/A |
| Weight | 7.34 kg (16 lb 2 oz) |
| Sold As | Single Unit |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
