Add the PULSE SUB to any System
With the RT100 you can pair any subwoofer wirelessly with the PULSE SOUNDBAR. The RT100 uses point-to-point wireless technology to connect the PULSE SOUNDBAR to your existing subwoofer without the hassle of messy cabling. Plus, as a full-range device and both a transmitter and receiver, you can use two RT100s and wirelessly connect any Gen 2 Bluesound Player with an active subwoofer – no speaker wire needed.
Key Features
- Connect any subwoofer to the PULSE SOUNDBAR wirelessly
- Easy, versatile option to add heart-pounding bass to any room without the hassle of messy cabling
- Perfect solution for adding non-wireless subwoofers to your Bluesound setup
- Connect one RT100 to any Gen 2 Bluesound Player, or an existing stereo system, and the second to your subwoofer to wirelessly add bass to any listening set-up
| Inputs | |
| USB | 2.0. USB Power Port Required (Not Included). |
| Analogue | 1 x 3.5 mm (Stereo, 3-Pole) |
| Outputs | |
| Analogue | 1 x 3.5 mm (Stereo, 3-Pole) |
| Features | |
| Sample Rate | 48 kHz |
| THD+N | ≤0.005% @ 2 V 1 kHz Input |
| Signal to Noise | ≥90 dB @ 2 V 1 kHz Input |
| Analogue Output Level | 2 V |
| Frequency Response | 20 Hz to 20 kHz ±0.5 dB |
| Audio Latency | <18 ms |
| RF Band | Triband (Auto Switching) |
| Transmission Range | 10m (Line of Sight) |
| Dimensions & Weight | |
| Unit Dimensions (W x H x D) | 80 x 50 x 21 mm |
| Net Weight | 0.085 kg |
| Shipping Carton Size (W x H x D) | 186 x 116 x 41 mm |
| Shipping Weight | 0.2 kg |
There are currently no reviews available for this product. Be the first to write a review!
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
