13.4 Ch 150W 8K AV Receiver with HEOS® Built-in
Unveiling the Denon AVC-A10H: Where Premium Power Marries Unprecedented Versatility. This masterpiece in audio engineering transcends the ordinary, delivering a symphony of strength and sophistication that redefines the boundaries of sound. Whether you're commanding a home theater or immersing yourself in high-fidelity music, the AVC-A10H is your ultimate partner, fusing raw power with seamless adaptability. Elevate your auditory experience to unparalleled heights, where every note is rendered with breathtaking clarity and every moment becomes a celebration of pure, unadulterated sound.
The AVR-A10H’s 13-channel monolithic amplifier delivers 150 watts per channel. As is typical in high-end amplifier designs, each channel is built on its own PCB to minimise crosstalk, and distortion.
All seven HDMI inputs support the highest resolution and fastest frame rates available. The AVR-A10H can pass through signals up to 8K/60Hz or 4K/120Hz frame rates in gaming scenarios.
13.4-channel processing powers systems up to 7.4.6 or 9.4.4 speaker configurations with support for Dolby Atmos, DTS:X Pro, IMAX Enhanced, and AURO-3D.
With the latest HDMI specification, each HDMI port supports 4K/120Hz, which means your video frame rate increases so you can always see who is coming around the corner.
Nine audiophile-grade 2-channel DACs maximise resolution for all 17 channels. Premium gold-plated speaker terminals and a rigid, three-layer chassis protect against vibration and interference, significantly reducing noise.
Stream music wirelessly from a variety of free and premium streaming services. Share content to HEOS-enabled devices, like Denon Home speakers in other rooms.
Designed and manufactured in Denon's premier Shirakawa factory in Japan, the AVR-A10H was tuned by the Denon Sound Master to provide the truest sonic reproduction.
Key Features
- Robust 13.4 channel amplifier
- State-of-the-art home theater
- Immersive 3D sound
- Next-generation gaming compatibility
- Hi-fi quality, inside and out
- HEOS Built-in
- Audyssey room correction
- Dirac Live upgradability for acoustic optimization
- Engineered and built in Japan
| Technical Information | |
| Number of Power Amps | 13 |
| Power Output | 150 Watts per Channel (8 Ohm, 20 Hz - 20 kHz, 0.05% THD, 2 Ch Driven) / 190 Watts per Channel (6 Ohm, 1 kHz, 0.7% THD, 2 Ch Driven) / 190 Watts per Channel (6 Ohm, 1 kHz, 1% THD, 1 Ch Driven) / 210 Watts per Channel (6 Ohm, 1 kHz , 10% THD, 1 Ch Driven) |
| Auto Speaker Setup by Microphone | Audyssey MultEQ XT32 |
| Front Display | 2 Lines FLD |
| GUI Languages | 9 |
| Inputs / Outputs | |
| HDMI In / Out | 7 / 3 |
| Analogue In / Out | 7+1 / 0 |
| Phono (MM) In | Yess |
| Digital In: Optical / Coaxial | 2 / 2 |
| Multi-Room Out: Analogue / Digital | 2 / 0 |
| Multichannel Pre-Out | Yes (15.4) |
| Subwoofer Out | 4 (Independent) |
| Other | |
| Number of Speaker Terminals | 15 |
| Speaker A/B | Yes (Assignable) |
| Bi-Amp Drive | Yes (Assignable) |
| Multi-Room Speaker Terminal | Yes (Assignable) |
| General | |
| System Remote Control | RC-1261 |
| Power Consumption | 900 W |
| Power Consumption No-Sound (ECO On / Off) | 70 W / 125 W |
| Standby Consumption | 0.1 W |
| CEC Standby Consumption | 0.5 W |
| Network Standby Consumption | Less than 2.0 W |
| Maximum Dimensions, Antenna Horizontal (W x D x H) | 434 x 482 x 195 mm |
| Maximum Dimensions, Antenna Vertical (W x D x H) | 434 x 482 x 259 mm |
| Maximum Dimensions, Without Antenna (W x D x H) | 434 x 472 x 195 mm |
| Weight | 23.6 kg |
| Shipping Weight | 27.6 kg |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
