Valve & Hybrid Amplifiers
Tube (or valve) amplifiers are renowned for their lush, warm and organic sound signature. Another attractive trait is the ability to tube roll (change tubes to voice the amplifier according to taste and/or better match the speakers).
Please note that there is no difference between a tube amplifier and a valve amplifier. The term tube is commonly used in the USA, while the term valve is used in the UK and here in Australia. Both terms refer to the exact same type of amplifier.
Canor AI 1.10 is an integrated tube amplifier with an entirely new topology equipped with KT88 high-power tubes. The amplifier operates in a pure class A with an auto-bias function, and with cathode feedback. Possibility to create a monoblock connection of 2 units.
Canor AI 2.10 is a hybrid integrated amplifier with an output power of 2 x 150 W / 4 Ω. Powered by a filtered and tuned linear power supply. The input transformer (toroid) is oversized which leads to the low noise. XLR inputs with a strictly symmetrical signal.
The CTA407 can provide an extraordinarily accurate reproduction of music without tendency towards listening fatigue, featuring strong dynamics and wide flexibility in the choice of speakers. The vanishing low perceived noise from the amplifier itself is bliss
The CSA100 integrated amplifier is a part of the latest work by Copland, aiming to combine the advantages of tubes and transistor amplification using the synectic design concept that previously has made Copland hybrid amplifiers widely acclaimed.
The CSA150 is the top model in the new line of Copland CSA series amplifiers. Under dynamic conditions this current feedback power plant will deliver several times its rated power - enough to drive almost any loudspeaker. 4 digital and 5 analogue inputs. 150 W per channel.
Unlike conventional phono stages, the Tube Box S2 harks back to a classic era of analogue sound, using a pair of valves to amplify your turntable’s signal. This alternative approach gives your sound a remarkably different feel, with outstanding warmth.
Unlike conventional phono stages, the Tube Box DS2 harks back to a classic era of analogue sound, using a pair of valves to amplify your turntable’s signal. Gives your sound a remarkably different feel, with outstanding warmth and a lush, laid-back sound.
Dual mono balanced tube phono-preamplifier. The Tube Box DS3 B adds balanced inputs and outputs to the beloved tube amplification. This precision tube phono preamplifier benefits from outstanding circuit technology from Dr. Sykora and uses ultimate components.
Canor PH 2.10 is an all-tube phono preamplifier for MM and MC cartridges. It contains the minimum number of amplification steps required to apply purely passive corrections. Without any global feedback, which results in excellent sound performance.
Canor PH 1.10 is an all-tube turntable preamplifier for both MM and MC phono cartridges (can be connected at the same). True balanced XLR output. The circuitry of PH 1.10 is a true differential. Absolute selection and tubes matching with above-average parameters.
Canor AI 1.10 is an integrated tube amplifier with an entirely new topology equipped with KT88 high-power tubes. The amplifier operates in a pure class A with an auto-bias function, and with cathode feedback. Possibility to create a monoblock connection of 2 units.
