Debut PRO S
Where Size Matters
Pro-Ject's turntables demand conscious music listening. The Debut PRO S takes this philosophy to the extreme. Pro-Ject finished all parts except for the polished spindle in matte black. The manual controls invite the listener to interact with the turntable: turn it on, place the record on the platter, move and lower the tonearm. The musical reward follows the tactile experience. No unnecessary switches, LEDs, or labelling distract from what is essential.
10" S-Shape
Not a Straight Line
A Milestone for the Next Decades
The Debut PRO S brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.
The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO S to its modern simple, elegant and unprecedented design.
Deeply Driven
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.
A New Platter – A Deeper Dish
The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing also MC cartridges to work properly.
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. The included Record Puck E provides an extra level of damping and stability.
Azimuth & VTA Adjustment
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.
PRO Features
Pick It S2 C
Unheard precision & dynamics.
The perfect combination of components is the key to achieve the great sound of the Pick it PRO S.
Alu Sub-Platter
Sustainable components.
The diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and will be a substantial upgrade to regular sub-platters.
10" S-Shape
New tonearm design.
This super stiff and uniquely dampened aluminium tonearm ensures perfect tracking of the record groove.
VTA & Azimuth
Fully adjustable.
The Debut PRO S comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.
33/45/78 RPM
High precision motor control.
The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.
Bearing Block
Complete new design.
The precision CNC milled tonearm bearing parts are completely new and designed just for the PRO.
Special Platter
TPE damped & anti magnetic.
The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.
Metal Feet
Damped & height adjustable.
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.
| Specifications | |
| Speed | 33, 45, 78 (Electronic Speed Change) |
| Drive Principle | Belt Drive with Electronic Speed Control |
| Platter | 300 mm, Die Cast Aluminium Platter with TPE Damping and Felt Mat |
| Platter Bearing | High Precision Stainless Steel Axle in Bronze Bushing |
| Speed Variance | 33: +/-0.40%; 45: +/-0.50% |
| Wow & Flutter | 33: +/-0.16%; 45: +/-0.14% |
| Signal to Noise | 68 dB |
| Tonearm | 10” S-Shape Aluminium; SME Connector |
| Effective Arm Length / Mass | 254 mm / 8 g |
| Overhang | 16 mm |
| Included Accessories | 15 V DC / 0.8 A Power Supply, Dust Cover, 78 RPM Round Belt, 7” Single Adapter, Record Puck E |
| Power Consumption | 4 W / 0 W Standby |
| Dimensions (W x H x D) | 462 x 145 x 345 mm |
| Weight | 7 kg |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
